GHD SC5 Contour
GHD SC5 Contour
For more technical information on the GHD 5.0 Gold Series models see our 5.0 page.
The video below shows a strip down of the GHD SC5 contour, other than the ceramic plates, all parts are the same as the GHD SS5 model.
We have a repair guide that covers this model here (it is the same inside as the mk4 models). If you don't fancy doing a repair yourself, this model is covered by our fixed price repair service.
If you are unsure which model you have, please see our GHD models page which shows you pictures of all the different models.
Product Compare (0)
Brand new replacement mains power cord very similar to the original GHD cables with European plug. S..
Brand new 70 ohm wide element suitable for the SS5 and SS4 Type 2 irons.This element is for the swit..
Brand new 70 ohm wide element with thermistor suitable for the SS5 and SS4 Type 2 irons.This element..
70 Ohm replacement heater element removed from a pair of wide plate GHD SS4.0s or SS5.0's. This m..
70 Ohm replacement heater element removed from a pair of GHD SS4.0s or SS5.0's. This measures 20m..
Thermal fuse suitable for all GHD's, except some variants of the MS4.0 irons (see HERE for the sm..
This part has now been updated and improved to ease fitting. 29-06-18This is a fully dressed ther..
This is used cable socket for use with type 3 cables. It may be fitted to type 2 GHD Mk 4.2 irons a..
This is new cable socket compatible with type 3 cables. It may be fitted to type 2 GHD Mk 4.2 irons..
MK 5 Bare Switch PCB.Swap this PCB if your switch is damaged or burnt out.Simply transfer the wires ..
SS5.0 Gold End Ring
This piece is frequently broken whilst attempting to dismantle the SS5.0 ..
A pair of PCB's from a set of GHD 5.0's.
This part is 2nd hand and has been removed fro..
Two brand new MELF resistors suitable for repairing GHD 4.2B, 4.2P or GHD Mk5 Gold where R8 or R11 ..
Eyelets (aka ring crimps) of the correct size for all GHD's.
This is a brand new item, the pr..
This item is a programmed PIC microprocessor for MK5 GHD PCBs. This is compatible with 5.0 models..
A screw suitable for attaching wires to GHD PCB terminals.
A pack of screws for all repairable models of GHD'sContains:4 screws for PCB terminals.2 screws t..
GHD SS5.0 Ceramic Plate Mounting Part Type 1.
Also fits the SS4.0 Type 2 model.
This one ..
GHD SS5 Ceramic Plate Mounting Part. Type 2.
This one has the two metal clips that hold the a..
2 metal clips used with Type 2 wide mounting plates.
This is the cap that covers the hinge pin on a pair of Mk5.0 Gold Series GHDs. Compatible with GH..
Brand new European to UK plug adapter fitted with 5A fuse. Suitable for converting the european plu..
Brand new ceramic plates for the GHD SC5 Contour range of irons.Although the images make them look g..
Showing 1 to 23 of 23 (1 Pages)