For more technical information on the GHD 5.0 Gold Series models see our 5.0 page.
We have a repair guide that covers this model here (it is the same inside as the mk4 models). If you don't fancy doing a repair yourself, this model is covered by our fixed price repair service.
If you are unsure which model you have, please see our GHD models page which shows you pictures of all the different models.
Product Compare (0)
Pair of silicon rubber pieces that fit the narrow ceramic plate holder on later MS4 models and all M..
Brand new heater element compatible with the GHD MS4.0 model. This heater measures 7mm x 70mm. Co..
Brand new narrow 80ohm heater element with thermistor. This heater is 7mm wide. Suitable for MS4.0 a..
80 Ohm heater element removed from a pair of GHD MS4.0's. This part is a genuine GHD p..
80 Ohm narrow heater element removed from a pair of GHD MS4.0's. This version has a thermistor at..
Brand new plain black caps that covers the hinge pin on a pair of GHD 4.2 type 2 irons. The two c..
PCB Interconnecting wires with screws...
Please see our new easy to fit fully dressed thermistor on the link below.https://www.ghd-repair.co...
This part has now been updated and improved to ease fitting. 29-06-18This is a fully dressed ther..
This is new cable socket compatible with type 3 cables. It may be fitted to type 2 GHD Mk 4.2 irons..
MK 5 Bare Switch PCB.Swap this PCB if your switch is damaged or burnt out.Simply transfer the wires ..
MS5.0 Non Switch Side Arm.
Replacement plastic housing from a pair of GHD MS5's. This is ..
MS5.0 Switch Side Arm.
Replacement plastic housing from a pair of GHD MS5's. This is the ..
A pair of PCB's from a set of GHD 5.0's.
This part is 2nd hand and has been removed fro..
Two brand new MELF resistors suitable for repairing GHD 4.2B, 4.2P or GHD Mk5 Gold where R8 or R11 ..
Eyelets (aka ring crimps) of the correct size for all GHD's.
This is a brand new item, the pr..
This item is a programmed PIC microprocessor for MK5 GHD PCBs. This is compatible with 5.0 models..
This item is a programmed PIC microprocessor for MK5 PCBs with the square piezo buzzer as s..
A screw suitable for attaching wires to GHD PCB terminals.
A pack of screws for all repairable models of GHD'sContains:4 screws for PCB terminals.2 screws t..
MS5.0 narrow plate mounting part.
This part is a 2nd hand and has been removed from a broken ..
MS5.0 Ceramic Plate. Gold finish.
Grade A. No marks on the ceramic plates surface.
This is the cap that covers the hinge pin on a pair of Mk5.0 Gold Series GHDs. Compatible with GH..
Brand new European to UK plug adapter fitted with 5A fuse. Suitable for converting the european plu..
Showing 1 to 24 of 25 (2 Pages)