For more technical information on the GHD 4.1B model see our 4.1B page.
We have a repair guide that covers this model here. If you don't fancy doing a repair yourself, this model is covered by our fixed price repair service.
If you are unsure which model you have, please see our GHD models page which shows you pictures of all the different models.
Product Compare (0)
Brand new replacement mains power cord very similar to the original GHD cables with European plug. ..
The Type 2 mains cable and socket have been phased out in favour of the newer type 3 cable and socke..
We are currently running a promotion on Genuine Used 70 Ohm Elements at just £7 including free therm..
Brand new 70 Ohm GHD heater element with thermistor attached. Heater has small ring crimps on th..
Special Offer For 2019 Due to Excess Stock.Just £7 with free thermal paste.Genuine 70 Ohm GHD hea..
Genuine used 70 Ohm GHD heater element with thermistor attached. Heater has small ring crimps on ..
Brand new plain black caps that covers the hinge pin on a pair of GHD 4.0 4.1 or 4.2 type 1 irons..
Thermal fuse suitable for all GHD's, except some variants of the MS4.0 irons (see HERE for the sm..
Please see our new easy to fit fully dressed thermistor on the link below.https://www.ghd-repair.co...
This is a fully dressed thermistor suitable for replacing the ones found in GHD 4.0B, 4.1B, 4.2 and ..
This is a brand new cable swivel socket.
It is a universal socket and fits all GHD's that use..
Cable swivel socket removed from a pair of Type 1 GHD 4.2P, 4.2B, 4.1B, MS4.0 or SS4.0. Suitable ..
Cable swivel socket removed from a pair of GHD 4.1Bs. Suitable for use with the Type 1 GHD Cables..
Replacement plastic housing from a pair of GHD 4.1B's. This is the non switch side arm.
Replacement plastic housing from a pair of 4.1Bs. This is the switch side arm, which the cable conn..
Replacement hinge pin and spring from a pair of type 1 GHD 4.0B / 4.2P / 4.2B's.
The brass co..
This is the small piece of plastic that stops the cable moving around inside the GHD straightener..
Two brand new MELF resistors suitable for repairing GHD 4.2B, 4.2P or GHD Mk5 Gold where either R8 ..
Two brand new MELF resistors suitable for repairing GHD 4.0b's where R8 has gone open circuit. Th..
Eyelets (aka ring crimps) of the correct size for all GHD's.
This is a brand new item, the pr..
This item is a programmed PIC microprocessor for mk4 GHD PCBs. This is compatible with 4.0B, 4.1B..
A screw suitable for attaching wires to GHD PCB terminals.
A pack of screws for all repairable models of GHD'sContains:4 screws for PCB terminals.2 screws t..
Plastic moulding for GHD 4.0B, 4.0P, 4.1B, 4.2B or 4.2P which holds the ceramic plates in place.
Showing 1 to 24 of 29 (2 Pages)