For more technical information on the GHD SS4.0 model see our
SS4.0 page. There are two versions of this model that are both labelled 4.2. We have called these the type 1 and the type 2 versions. To see the differences between these two versions have a look at the type 1 vs type 2 page. We have a repair guide that covers this model here. If you don't fancy doing a repair yourself, this model is covered by our fixed price repair service. If you are unsure which model you have, please see our GHD models page which shows you pictures of all the different models.
Product Compare (0)
Name (A - Z)
Name (Z - A)
Price (Low > High)
Price (High > Low)
Model (A - Z)
Model (Z - A)
The Type 2 mains cable and socket have been phased out in favour of the newer type 3 cable and socke..
Brand new replacement mains power cord very similar to the original GHD cables with European plug. S..
Pair of silicon rubber pieces that fit the wide ceramic plate holder on later SS4 models and all SS5..
Brand new 70 ohm wide element suitable for the SS5 and SS4 Type 2 irons.This element is for the swit..
Brand new 70 ohm wide element with thermistor suitable for the SS5 and SS4 Type 2 irons.This element..
We are currently running a promotion on Genuine Used 70 Ohm Elements at just £7 including free therm..
Brand new 70 Ohm GHD heater element with thermistor attached. Heater has small ring crimps on th..
Special Offer For 2019 Due to Excess Stock.Just £7 with free thermal paste.Genuine 70 Ohm GHD hea..
Genuine used 70 Ohm GHD heater element with thermistor attached. Heater has small ring crimps on ..
70 Ohm replacement heater element removed from a pair of wide plate GHD SS4.0s or SS5.0's. This m..
70 Ohm replacement heater element removed from a pair of GHD SS4.0s or SS5.0's. This measures 20m..
Thermal fuse suitable for all GHD's, except some variants of the MS4.0 irons (see HERE for the sm..
Please see our new easy to fit fully dressed thermistor on the link below.https://www.ghd-repair.co...
This is a fully dressed thermistor suitable for replacing the ones found in GHD 4.0B, 4.1B, 4.2 and ..
Cable swivel socket removed from a pair of Type 1 GHD 4.2P, 4.2B, 4.1B, MS4.0 or SS4.0. Suitable ..
This Type 2 socket along with the Type 2 cable has been phased out.Please replace your Type 2 socket..
This is used cable socket for use with type 3 cables. It may be fitted to type 2 GHD Mk 4.2 irons a..
This is new cable socket compatible with type 3 cables. It may be fitted to type 2 GHD Mk 4.2 irons..
Replacement plastic housing from a pair of Type 1 GHD SS4.0's. This is the non switch side arm fr..
Replacement plastic housing from a pair of Type 1 GHD SS4.0's. This is the switch side arm from a..
Replacement plastic housing from a pair of GHD SS4.0's. This is the non switch side arm from a type..
Replacement plastic housing from a pair of Type 2 GHD SS4.0's. This is the switch side arm from a t..
Replacement hinge pin and spring from a pair of type 2 GHD 4.2B or GHD SS4.0s.To determine you have..
This is the small piece of plastic that stops the cable moving around inside the GHD straightener..
Showing 1 to 24 of 37 (2 Pages)