For more technical information on the GHD 3.1B model see our 3.1b page.
We have a repair guide that covers this model here. If you don't fancy doing a repair yourself, all these models are covered by our fixed price repair service.
If you are unsure which model you have, please see our GHD models page which shows you pictures of all the different models.
Product Compare (0)
Brand new replacement mains power cord very similar to the original GHD cables with European plug. ..
Brand new 160 Ohm replacement heater element compatible with all Mk 3 GHD straighteners (includin..
160 Ohm replacement heater element removed from a pair of GHD3.1B's. Compatible with GHD3, GHD 3...
Brand new plain black caps that covers the hinge pin on a pair of GHD3.1B or GHD SS2's. The two c..
Thermal fuse suitable for all GHD's, except some variants of the MS4.0 irons (see HERE for the sm..
This is a brand new cable swivel socket.
It is a universal socket and fits all GHD's that use..
Cable swivel socket removed from a pair of GHD 3.1b or GHD SS2's. Suitable for use with the Mk3 c..
Replacement plastic housing from a pair of Pink GHD 3.1B's. This is the non switch side arm.
Replacement plastic housing from a pair of pink GHD 3.1's. This is the switch side arm, which is ..
Replacement plastic housing from a pair of GHD 3.1B's. This is the non switch side arm.
Replacement plastic housing from a pair of GHD 3.1B's. This is the switch side arm, which is also..
This is the cover that goes over the cable socket on a pair of GHD 3.1Bs.
This part is 2nd ha..
Replacement hinge pin and spring from a pair of GHD 3.1b / GHD SS2's.
The brass coloured hing..
This is the cover from the non switch side arm of a pair of GHD 3.1Bs. This is the side with the ..
This is the cover from the switch side arm of a pair of GHD 3.1Bs. This is the side with the hole..
The rubber O ring from a pair of GHD Mk3's (including GHD 3.1b and GHD SS) which goes around the ..
This is the small piece of plastic that stops the cable moving around inside the GHD straightener..
A pair of PCB's from a set of GHD 3.1B's We have various different PCB revisions which is why we se..
Eyelets (aka ring crimps) of the correct size for all GHD's.
This is a brand new item, the pr..
A screw suitable for attaching wires to GHD PCB terminals.
A pack of screws for all repairable models of GHD'sContains:4 screws for PCB terminals.2 screws t..
Plastic moulding for GHD 3.1 (Pink) which holds the ceramic plates in place.
These parts can ..
Plastic moulding for GHD 3.1b which holds the ceramic plates in place. Also compatible with some ..
Cap that covers the hinge pin on a pair of GHD3.1B or GHD SS2's. The two clips on this cap are di..
Showing 1 to 24 of 30 (2 Pages)