For more technical information on the GHD MS4.0 model see our
MS4.0 page. There are two versions of this model that are both labelled 4.2. We have called these the type 1 and the type 2 versions. To see the differences between these two versions have a look at the type 1 vs type 2 page. We have a repair guide that covers this model here. If you don't fancy doing a repair yourself, this model is covered by our fixed price repair service. If you are unsure which model you have, please see our GHD models page which shows you pictures of all the different models.
Product Compare (0)
Name (A - Z)
Name (Z - A)
Price (Low > High)
Price (High > Low)
Model (A - Z)
Model (Z - A)
Pair of silicon rubber pieces that fit the narrow ceramic plate holder on later MS4 models and all M..
Brand new heater element compatible with the GHD MS4.0 and MS5 models. This heater measures 7mm x..
Brand new narrow 80ohm heater element with thermistor. This heater is 7mm wide. Suitable for MS4.0 a..
80 Ohm heater element removed from a pair of GHD MS4.0's. This part is a genuine GHD p..
80 Ohm narrow heater element removed from a pair of GHD MS4.0's. This version has a thermistor at..
Thermal fuse suitable for the GHD MS4 irons fitted with the very small thermal fuse ONLY! For all..
Please see our new easy to fit fully dressed thermistor on the link below.https://www.ghd-repair.co...
This is a fully dressed thermistor suitable for replacing the ones found in GHD 4.0B, 4.1B, 4.2 and ..
Cable swivel socket removed from a pair of Type 1 GHD 4.2P, 4.2B, 4.1B, MS4.0 or SS4.0. Suitable ..
Replacement plastic housing from a pair of GHD MS4.0's. This is a non switch side arm type 1 arm...
Replacement plastic housing from a pair of GHD Type 1 MS4.0's. This is the switch side arm which ..
Replacement plastic housing from a pair of GHD MS4.0's. This is a non switch side arm type 2 arm...
Replacement plastic housing from a pair of GHD Type 2 MS4.0's. This is the switch side arm which ..
Two brand new MELF resistors suitable for repairing GHD 4.2B, 4.2P or GHD Mk5 Gold where either R8 ..
Eyelets (aka ring crimps) of the correct size for all GHD's.
This is a brand new item, the pr..
A screw suitable for attaching wires to GHD PCB terminals.
A pack of screws for all repairable models of GHD'sContains:4 screws for PCB terminals.2 screws t..
Plastic moulding for GHD MS4.0 type 1 which holds the ceramic plates in place.
These parts ca..
Plastic moulding for GHD MS4.0 type 2 which holds the ceramic plates in place.
These parts ca..
Cap that covers the hinge pin on a pair of 4.2B Type 2 GHDs.
This is a second hand part which..
Brand new European to UK plug adapter fitted with 5A fuse. Suitable for converting the european plu..
Heater clips from a pair of GHD MS4.0. One clip is designed to hold just a heater onto a heater p..
Showing 1 to 22 of 22 (1 Pages)