For more technical information on the GHD 5.0 Gold Series models see our 5.0 page.
We have a repair guide that covers this model here (it is the same inside as the mk4 models). If you don't fancy doing a repair yourself, this model is covered by our fixed price repair service.
If you are unsure which model you have, please see our GHD models page which shows you pictures of all the different models.
Product Compare (0)
Brand new replacement mains power cord very similar to the original GHD cables with European plug. S..
Pair of silicon rubber pieces that fit the wide ceramic plate holder on later SS4 models and all SS5..
Brand new 70 ohm wide element suitable for the SS5 and SS4 Type 2 irons.This element is for the swit..
Brand new 70 ohm wide element with thermistor suitable for the SS5 and SS4 Type 2 irons.This element..
We are currently running a promotion on Genuine Used 70 Ohm Elements at just £7 including free therm..
Brand new 70 Ohm GHD heater element with thermistor attached. Heater has small ring crimps on th..
Special Offer For 2019 Due to Excess Stock.Just £7 with free thermal paste.Genuine 70 Ohm GHD hea..
Genuine used 70 Ohm GHD heater element with thermistor attached. Heater has small ring crimps on ..
70 Ohm replacement heater element removed from a pair of wide plate GHD SS4.0s or SS5.0's. This m..
70 Ohm replacement heater element removed from a pair of GHD SS4.0s or SS5.0's. This measures 20m..
Brand new plain black caps that covers the hinge pin on a pair of GHD 4.2 type 2 irons. The two c..
PCB Interconnecting wires with screws...
Thermal fuse suitable for all GHD's, except some variants of the MS4.0 irons (see HERE for the sm..
Please see our new easy to fit fully dressed thermistor on the link below.https://www.ghd-repair.co...
This is a fully dressed thermistor suitable for replacing the ones found in GHD 4.0B, 4.1B, 4.2 and ..
This is used cable socket for use with type 3 cables. It may be fitted to type 2 GHD Mk 4.2 irons a..
This is new cable socket compatible with type 3 cables. It may be fitted to type 2 GHD Mk 4.2 irons..
Replacement plastic housing from a pair of GHD SS5.0's. This is the non switch side arm.
Replacement plastic housing from a pair of GHD SS5.0's. This is the switch side arm, which is als..
SS5.0 Gold End Ring
This piece is frequently broken whilst attempting to dismantle the SS5.0 ..
A pair of PCB's from a set of GHD MK5.0's.
This part is 2nd hand and has been removed f..
Two brand new MELF resistors suitable for repairing GHD 4.2B, 4.2P or GHD Mk5 Gold where either R8 ..
Eyelets (aka ring crimps) of the correct size for all GHD's.
This is a brand new item, the pr..
This item is a programmed PIC microprocessor for MK5 GHD PCBs. This is compatible with 5.0 models..
Showing 1 to 24 of 34 (2 Pages)