• Thermistor for Mk4 and Mk5 GHD's Fully Dressed.

This part has now been updated and improved to ease fitting. 29-06-18



This is a fully dressed thermistor suitable for replacing the ones found in GHD 4.0B, 4.1B, 4.2 and MK5. This part requiries high temperature silicon sealant to fit and for this reason we also stock the element that has a thermistor pre attached by us - heater with thermistor.

Please watch our video below on how to attach this thermistor to your existing element.

The wires are pre-tinned for easy soldering to the PCB pads.

Please note that the wires are to be laid flat onto the PCB pads and some solder used to attach them.

These wires are thicker than on the original so do not attempt to feed them through the PCB.

Do not be tempted to just rest the thermistor on the element without silicon sealant, the irons will overheat every time they are switched on and eventually the thermal fuse will fail.



More details of this can be found here

 

Short URL for this page:

Write a review

Note: HTML is not translated!
    Bad           Good

Thermistor for Mk4 and Mk5 GHD's Fully Dressed.

  • £5.99


Available Options


Related Products

70 Ohm Heater Element with Thermistor

70 Ohm Heater Element with Thermistor

Brand new 70 Ohm GHD heater element with thermistor attached. Heater has small ring crimps on th..

£9.70

80ohm Narrow Heater Element with Thermistor

80ohm Narrow Heater Element with Thermistor

Brand new narrow 80ohm heater element with thermistor. This heater is 7mm wide. Suitable for MS4.0 a..

£15.00