When replacing the mains cable or mains socket a small amount of Electrolube CG60 grease should be applied as shown in the additional images.

This is a highly specialized grease uniquely designed for this type of application.

This will allow your cable to rotate smoothly and will help prolong the life of your new mains cable and mains socket as fitted.

Apply a small amount to the end of the cable as shown, then apply some of that grease to the socket by putting the cable end into the socket slightly and rubbing it around.

The fully insert the mains cable into the socket to complete the process.

Wipe off any excess.

This applies to all models of GHD's.

We supply a small amount on a waxed piece of paper in a zip lock bag. This is more than enough for all cable and socket combinations.