Very low stock.

160 Ohm replacement heater element removed from a pair of GHD3.1B's. Compatible with GHD3, GHD 3.1B, GHD SS and GHD SS2.

This heater element measures 15mm x 70mm

This part is a genuine GHD part, however is of course 2nd hand.

The thermal paste must be renewed when fitting this element and is available as an option at £1.10

Details of how to fit this component in GHD 3.1b's can be found here. These instructions are also basically correct for GHD3's, however the parts may look very slightly different.

If this item is not in stock, then we also stock an equivalent (non genuine part). See the related products below

You must renew the thermal paste when fitting a new element. This is available as an optional extra with this item.

The temperature must be checked and adjusted after fitting a replacement element!

You will need a temperature tester and must then adjust the potentiometer on the PCB to attain 186 Degs C

Only the tiniest movement of the potentiometer should be made between temperature checks.

Wait 30 seconds between checks.