Thermal fuse suitable for all GHD's, except some variants of the MS4.0 irons (see HERE for the smaller MS4 thermal fuse). This thermal fuse is rated at 240 degs.

Please make sure that any over heating fault is repaired before fitting a new thermal fuse!

There will be a reason the thermal fuse has failed, except on MK3.1 irons, where failure can occur due to ageing. See our guide HERE

All thermal fuses are individually checked for good continuity before being sent out.

This thermal fuse is slightly larger than the fuse used in older models of GHD. Therefore modification of the plastic plate mounting part may be required. For more information please see our support page about thermal fuses and watch the video below.

 

Short URL for this page:

Write a review

Note: HTML is not translated!
    Bad           Good

Thermal Fuse

  • £5.99