GHD MS

This model is based upon the GHD3 design, however the plates are narrower. "MS" stands for "Mini Styler"

Some random facts:

The main cause of failure is heater wires coming off the heaters.
They only have a PCB in the switch side arm. Therefore the wires on the non switch side heater are extended to go around the hinge and connect to that PCB.
They do not suffer from thermal fuse failures as the fuse is mounted behind the PCB, rather than on the heater plate.
To replace the cable on this model, our mk4 cable replacement instructions are the most appropriate.

Photos

Spares

Replacement heaters are available in our shop

If you require any spares not listed on our shop, please get in contact with us, as occasionally we do get some. Normally the spares get sold before we have chance to add them to the shop catalogue!

FAQs

How do I debug my Mk3 GHDs?
Will my GHDs work in America?
How do I replace a broken arm?

This page was last updated at 11:07pm on 15th April 2010