Common GHD Faults

There are a few common faults that occur with GHD straighteners:

• Thermal Fuse (GHD 3.1B mainly)
• Cables (all GHD models)
• Thermistor (Mk4 GHD models only)
• Heater (All GHD models)
• R8 Resistor (Early Mk4 GHD models only)
• Broken Arms (Any model that's been trodden on!)
• Loose Plates (Any model that's been dropped)

 

This page was last updated at 11:32pm on 25th January 2010

All content © Gary Ewer 2007-09. Website Terms & Conditions