How do you replace the cable on GHD MS?

deno86
Posts: 1
Joined: 02 Dec 2008, 04:17

How do you replace the cable on GHD MS?

Postby deno86 » 02 Dec 2008, 04:21

Hey, my cable recently burnt out on my GHD MS's and doesnt work anymore. I have received a new cable through the post but have no idea how to replace it. I cant even find what needs to be unscrewed etc!!! Any help would be greatly appreciated.

THanks

Deno

gary
Site Admin
Posts: 1032
Joined: 26 Jan 2008, 00:44

Re: How do you replace the cable on GHD MS?

Postby gary » 02 Dec 2008, 10:05

Hi Deno,

The MS versions that I've seen have been of similar design to the 3.1B's and therefore the cable replacement procedure was the same (http://www.ghd-repair.co.uk/cable_replacement_3.1b.html).

If that's not the case and you don't see the screws that are undone in step 1, then you'll probably need to undo the hinge to access those screws. Undoing the hinge is described in steps 1 to 4 of http://www.ghd-repair.co.uk/thermal_fus ... _3.1b.html. After that is should be the same as the first guide I mentioned above.

Gary


Return to “GHD MS”

Who is online

Users browsing this forum: No registered users and 1 guest