Search found 10 matches

by nird
29 Oct 2014, 13:10
Forum: GHD MS
Topic: Dead - Confused!
Replies: 3
Views: 4442

Re: Dead - Confused!

Hi Gary,

yes....both elements reading correctly on both sets.
Is there a way to test pcb?

thanks
by nird
29 Oct 2014, 00:28
Forum: GHD MS
Topic: Dead - Confused!
Replies: 3
Views: 4442

Dead - Confused!

Hi Guys.... I have to old MS units which I have had sitting around as spares for quite a while. As far as I am aware they just needed replacement elements. I ordered replacements (both sides for both units) and fitted. Both units are still dead. I have tested the thermal fuse, measured the elements,...
by nird
25 Nov 2013, 13:10
Forum: GHD 4.2B
Topic: Baffled!!
Replies: 4
Views: 4130

Re: Baffled!!

Hi Gary - yes heater and thermal fuse definitely connected the right way round and both elements were heating up. Kevin - That makes a lot of sense. I obviously had to replace the heater again the last time I tested it with a replacement pcb (clutching at straws as it was the only remaining part I h...
by nird
21 Nov 2013, 21:37
Forum: GHD 4.2B
Topic: Baffled!!
Replies: 4
Views: 4130

Re: Baffled!!

Just to update - replacing the S/S pcb seems to have resolved the problem.

Still no idea what was causing the element to crack each time however.

Going to test the suspect pcb on a known good unit to confirm.
by nird
21 Nov 2013, 21:03
Forum: GHD 4.2B
Topic: Baffled!!
Replies: 4
Views: 4130

Baffled!!

Hi Guys, I've repaired hundreds of Ghds and thought I had seen pretty much all faults until now. I have a set of 4.2b Type II that came in with 2 broken heaters. I replaced both heaters and assumed the unit had been dropped or hit. When I powered them on after repair with the thermocouple attached t...
by nird
01 Sep 2013, 14:25
Forum: Non GHD Hair Straighteners
Topic: Corioliss C2 - 'EHA' Error
Replies: 7
Views: 11725

Re: Corioliss C2 - 'EHA' Error

Thanks for the info - will check this next time I come across it.
By any chance does anyone know a source for Corioliss spares?

Many thanks
by nird
12 Jul 2013, 12:57
Forum: Non GHD Hair Straighteners
Topic: Corioliss C2 - 'EHA' Error
Replies: 7
Views: 11725

Re: Corioliss C2 - 'EHA' Error

Have another pair with this error.
Would appreciate if anyone has any further info on this??
by nird
12 May 2013, 20:18
Forum: Non GHD Hair Straighteners
Topic: Corioliss C2 - 'EHA' Error
Replies: 7
Views: 11725

Corioliss C2 - 'EHA' Error

Hi all,

Anybody come across this error before with C2.
The error is showing up intermittently but everything seems to be working fine.
I'm guessing a loose connection somewhere but would be good if someone knew exactly what the code refers to.

Thanks in advance
by nird
20 Oct 2012, 18:09
Forum: Non GHD Hair Straighteners
Topic: Corioliss C2 - 'ERR' dislpayed
Replies: 5
Views: 17456

Re: Corioliss C2 - 'ERR' dislpayed

Hi Kevin,

Many thanks for the replay. I did in fact replace the cable between the digital control box and the straighteners and it did resolve the problem.

Thanks again.
by nird
10 Oct 2012, 21:38
Forum: Non GHD Hair Straighteners
Topic: Corioliss C2 - 'ERR' dislpayed
Replies: 5
Views: 17456

Corioliss C2 - 'ERR' dislpayed

Wondering if anyone would have any experience with Corioliss C2. They heat up fine then display 'ERR' on the digitial control and stop heating. It is intermittent although does happen most times. I have tested at various temperatures and it does not seem to matter whether low or high temperature whe...

Go to advanced search